Application

• The HMET 2 door product line provides users with a rugged housing for industrial control and operator interface in industrial environments.
• Modular design permits joining of units together for large scale and mixed use applications.
• Frame's 25mm hole pattern provides extensive component and accessory mounting flexibility.
• A broad range of industry standard sizes are offered.

Standards

• UL 508A Type 12
• CSA Type 12
• Complies with
  • NEMA Type 12
  • IEC 60529 IP54

Configuration

• Frame
• Removable solid top panel
• Lifting eyebolts (4)
• Removable bottom panel w/gland plates
• Two overlapping solid front doors with door frames
• Removable rear cover panels (1 or 2 depending on width) with welded rear center post on units 1000 mm and wider.
• Full width inner mounting panel

Construction

• Formed 14 gauge steel.
• Fully welded frame with 25mm hole pattern for superior mounting flexibility.
• Foam gasket on all openings provides a dust-tight seal.
• Reinforced eyebolts are provided for easy enclosure lifting.
• Frames can be joined together with an optional joining kit.
• Doors can be easily interchanged, removed and/or reversed.
• Door opening 135°.
• Optional formed 14 gauge steel side panels are sold separately (in pairs).
• Bonding and grounding studs are provided for all doors and panels.

Finish

• Phosphatized and finished in RAL 7035 light gray powder coating.
• Inner panel is unpainted galvanized 12 gauge steel.